Amana Easy Touch Control 800 Use & Care Manual page 9

Control Panel
\
\
\
\
A
\
\
\\\\ ........... I
l J
The control panel is designed for ease in programming. The dispiaywindow on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on modeL)
A
B
E
F
H
J h
K
M
N
Convect
Bake
Broii
Cancei
CHock
Oven Light
Favorite
Ciean
Cook &Hoid
Keep Warn1
Delay
Number Pads
Autoset
Timer
Use for convection baking and roasting.
Use for baking and roasting.
Use for broiling and top browning.
Cancels all operations except Timer
and Clock.
Use to set time of day clock.
Use to turn the oven light on or off.
Use to set and save a specific Cook &
Hold procedure.
Use to set self-clean cycle.
Bakes for a preset time, then holds food
warm for 1 hour.
Use to keep cooked food warm in oven.
Programs the oven to start baking at
a later time.
Use to set time and temperature.
Use to quickly set temperatures.
Sets Timer.
Using the Touchpads
Press the desired pad.
Press the number pads to enter time or temperature.
Press the Autoset 0 pad to enter temperature.
, A beep wiii sound when any pad is touched.
, A doubie beep wiii sound if a programming error occurs.
Note: Four seconds after pressing the number pads or
the Autoset pad, the time or temperature wiii automaticaiiy
be entered. If more than 30 seconds eiapse between
touching a function pad and the number pads or the
Autoset pad, the function wiii be cancelled and the dispiay
wiii return to the previous dispiay.
8
The clock can be set to display time in a 12-hour or 2a-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to
24-hour format:
1, Press and hoid the Cancei and Favorite
pads for three seconds,
, 12 Hr flashes in the display. --Favor'it;e
2. Press the Autoset 0 pad to select 24 Hr;
press again to select 12 Hr.
O
3. Set the time of day following the directions Autoset
in the To set the Clock section.
To set the Clock:
1. Press the Clock pad.
Clock
, The time of day flashes in the dispiay,
2. Press the appropriate number pads to set the time of day.
° Colon flashes in the display.
3. Press the Clock pad again or wait four seconds.
, The coion wiii remain on.
When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash+ cent.