Amana Easy Touch Control 800 Use & Care Manual page 27

PROBLEM
Smoethtop surface shows 1+Tiny scratches or abrasions+
wear. , Make sure cooktop and pan bottom are dean. Do not sHidegHassor metal pans
across top. Make sure pan bottom is not rough. Use the recommended
cHeaningagents. See page 21.
2. Metd marks.
, Do not sHidemetaHpans across top. When cool dean with Cooktop
CHeaningCreme. See page 21.
3. Brown streaks and specks.
, Remove spills promptHy.Never wipe with a soiHedcHothor sponge. Make sure
cooktop and pan bottom are dean.
4. Areas with a metallic sheen.
, MineraH deposits from water and food. Use recommended cHeaning agents.
See page 21.
5. Pitting or flaking.
, Remove sugary boiHoverspromptHy.See page 21.
Moisture collects on oven , This is normal when cooking foods high in moisture.
window or steam comes from , Excessive moisture was used when cleaning the window.
even vent.
There is a strong odor or light + This is normal for a new range and will disappear after a few uses+ hitiating a clean
smoke when oven is turned on. cycle will "burn off" the odors more quickly.
+ Turning on a ventilation fan will help remove the smoke and/or odor.
+ Excessive food soils on the oven bottom. Use a self-clean cycle.
Fault Codes + BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem. If BAKE or LOCK appear in the display, press Cancel pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
+ If the oven is heavily soiled, excessive fiareups may result in a fault code during
cleaning. Press the Cancel pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
Noises may be heard. + The oven makes several low level noises. You may hear the oven relays as they go on
and off. This is normal.
+ As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
There are no beeps and + Oven may be in Sabbath Mode. See page 14+
"SAb" flashing and then + Oven is in Sabbath Mode+To cancel press and hold tile Clock pad for five
seconds.
26