Related Manuals for Matsusada Precision PZJ Series
Summary of Contents for Matsusada Precision PZJ Series
- Page 1 Instruction Manual PZJ series (Single output) MODEL *037.9.077* B/N 037.9.077 Rev. 2.2...
- Page 2 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of Matsusada Precision. No patent liability is assumed with respect to the use of the information contained herein.
- Page 3 Bistable push button switch for preventing electric shock) Indicates the possible danger of death if Bistable push button switch you drink it and burns or blindness if it attaches. Indicates the possible danger of exposure Alternative Current to radiation. Matsusada Precision PZJ series...
- Page 4 It may result in electric shock or fire. Regarding the input voltage Check the page describing the input terminals and input voltage in the instruction manual. Do not provide any voltage out of the specifications. Matsusada Precision PZJ series...
- Page 5 In order to avoid electric shock, ground the terminals to discharge using a short-circuit grounding apparatus and check the voltage again. The terminals here mean all terminals like input and output terminals and terminals for communications and remote controls. Matsusada Precision PZJ series...
- Page 6 It requires to be replaced at regular intervals to extend the lifetime. For the replacement, contact us. (It requires a replacement charge separately. Do not replace it by yourself, as there is a risk of electric shock.) Matsusada Precision PZJ series...
-
Page 7: Table Of Contents
Table of Contents Introduction ............................1 Greetings ............................ 1 Unpacking ........................... 1 Initial inspection .......................... 1 Installation conditions ........................2 Precautions for handling ......................3 Torubleshooting .......................... 3 Input specifications and operating conditions ................4 External Appearance ......................... 5 Front panel ..........................5 Rear panel .......................... -
Page 9: Introduction
1 Introduction Greetings Thank you very much for your purchase of Matsusada Precision piezo driver. This Instruction Manual was written to provide the user with instructions on the safe operation of our piezo driver. Matsusada Precision takes every precaution to ensure the quality of our products. Please refer carefully to this manual in order to use this product correctly and safely, and to achieve the best possible performance. -
Page 10: Installation Conditions
Doing so may cause a short circuit, resulting in electric leakage, burnout, fire, or malfunction. When moving this product, be careful not to apply shock to the protrusions on the front panel or rear panel. Matsusada Precision PZJ series... -
Page 11: Precautions For Handling
After the replacement, push the cap until it is locked in place, and turn it clockwise. If nothing meets the above case, or if the problem is not solved after checking, please contact our sales office where you purchased the product. Matsusada Precision PZJ series... -
Page 12: Input Specifications And Operating Conditions
Installation altitude 2000m or lower *1 230Vac with –L(230V) option *2 OVC II: Energy-consuming devices that are supplied with power from fixed equipment *3 Pollution degree 2: Only non-conductive pollution, except for temporary conductivity due to condensation. Matsusada Precision PZJ series... -
Page 13: External Appearance
(3) FUSE (5A) (4) AC input connector (5) Sensor input terminal (-LVs option) (6) Output voltage monitor (-L2 option) (7)Terminal block for options (-LS option) (8) External sensor select switch (-LVs option) FUSE Dimension: 140W×140H×330D [mm] Matsusada Precision PZJ series... -
Page 14: Instruction For Handling
If the average current I is used beyond the rated output current I , the output is stopped. mean ≦I mean ≦10ms (See “Overcurrent protection in instruction manual.) Matsusada Precision PZJ series... -
Page 15: Operation
At the same time, the yellow indicator of the OUTPUT ON/OFF switch turns off. To rest, turn OFF the POWER ON/OFF switch once and then, turn it ON again. Matsusada Precision PZJ series... -
Page 16: Optional Features
When an open collector is used with -LS function of options, use it according to the following conditions. Definition of Open Collector Output Switch Open collector Short 0.4V or less (10mA) Open 2V or more (Open 5V) Matsusada Precision PZJ series... -
Page 17: External Sensor Input (-Lvs)
(If the output is ON at the time of power failure, the output will be turned ON by restoring the power. On the other hand, if the output is OFF at the time of power failure, the output will be turned OFF by restoring the power.) Matsusada Precision PZJ series... - Page 19 Revision History Rev. No. Rev. Date Rev. Description 2019/06 Integrated PZJ series 2021/04 Changed the format, reviewed the contents. 2021/04 Corrected words. Matsusada Precision PZJ series...
Need help?
Do you have a question about the PZJ Series and is the answer not in the manual?
Questions and answers