System Connections; Connection Of Speakers - Kenwood KRX-792 Instruction Manual

System connections
Make connection as shown below. When connecting the related system components, refer also to the instruction manuals
of the related components.
Do not plug in the power lead until all connections are completed.
AC outlets
U.S.A.,C. da, and
FM DE-EMPHASIS/CHANNEL SPACE switch
(Except for some areas)(Refer to page 7.) Australia
AC voltage selector
CD player
moe hc 100 720v_7280).7ea0v-
ea Lexy
2
ees gt Unplug the shorting pins from the
' ADAPTOR jacks and connect the
Video : we ;
Audio component to these jacks. TEE terre ctw
haa, 1 "a When the ADAPTOR jacks are not co
used, be sure to plug the shorting
weoen_| Ty pins into the jacks.
System control cord Otherwise, the sound will not be
xo
= produced.
Antenna terminals
(Refer to page 7.)
By connecting this unit to other KENWOOD system To wall
BEAT CANCEL switch Daas components equipped with SYSTEM CONTROL AC outlet
(Refer to page 16.) terminals, the following convenient operations will
be available.
1. Automatic play operation
2. Synchro recording
3. Remote control
M Connection of speakers
@) Push lever.
od
@) Insert cord.
| fel = = [ols
SPEAKERS (8~46 0)
@ Never short-circuit the + and — speaker cords.
@ lf the left and right speakers are connected inversely or if the speaker
cords are connected with reversed polarity, the sound becomes
unnatural with ambiguous acoustic image positioning. Be sure to
connect the speakers and speaker cords correctly.
Notes:
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection
cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
8 KRx-792 (En)