Table of Contents
Advertisement
System connections
FM indoor antenna
er
a
300 2 Feeder
|
75 Q2Coaxial Cable
AM outdoor antenna
FM outdoor antenna
Speaker system A
Right
L
LINE OUT
Turntable
Tape deck B
Speakers
If only one set of speakers is to be connected, make connec-
tions to the terminals marked SPEAKERS
A. Connect the
speakers to the [L] and [R] terminals in accordance with the
location
selected
for each
speaker.
To
ensure
correct
speaker phasing, observe polarity marks; connect terminals
marked (+) on the receiver to similarly-marked speaker ter-
minals.
Do the same
for receiver and speaker terminals
marked witha minus sign. Reversal of speaker leads will re-
sult in loss of bass tones and poor stereo separation.
If a second set of speakers is to be used make connections
at the set of terminals, marked B.
It is recommended that the tips of the speaker leads be sol-
dered, or the strands of individual leads be 'twisted together
to eliminate any possibility of short-circuits forming in the
speaker connecting network.
Note:
\f a single pairof speakers ts to be used, each speaker must be rated
at 4 ohms or more.
4
KR-930 (k)
If only one tape deck is to be connected to the system it is
recommended
that it be connected
to the jacks marked
TAPE A.
Playback
Plug the left and right output cables of the tape deck into the
and [R] TAPE A PLAY jacks.
Record
Plug the left and right input cables of the tape deck into the
[L]and [R] TAPE A REC jacks.
Advertisement
Table of Contents
