Switch The Power On - Kenwood KRX-792 Instruction Manual

Be sure to adjust the present time before proceeding to the
following.
Timer operations
@ Timer playback of CD
Plug the CD player's power cord into the AC outlet on this unit's rear panel. When connected in this manner, always leave
the CD player's POWER key ON and control the power to the CD player from this unit.
1 Switch the power ON. 6 Place a disc in the CD player.
Label side
e@ Remove tape(s) from the cassette decks.
Select the program setting mode.
| PROG. 7 | PROG. 2 JE
2] EpFER
=>
PROG. 1 or PROG. 2.
Input the ON time with the numeric keys. Program 1 Program 2 Programs 1 Timer programs
will be will be and2willbe will not be
6:30 AM: Co} ; a : Bl ; io executed. executed. executed. executed.
OOOOOOO w Tr oo + Boe > o c
@ The selected program No. indicator lights up.
Input the OFF time with the numeric keys. 8 Adjust the volume.
©COOOOOO wy
Press the ENTER key once. 9 Switch the power OFF.
POWER
Lae |
Notes:
1. If you commit a mistake in the timer programming, re-start a new program from the beginning.
2. If it is required to modify a program which has already been set, set a new program from the beginning.
3. When a program has previously been set in the program No. selected in step 2, the newly-set program replaces the previous program.
4. Do not operate the key or key while the time program execution has been activated; otherwise malfunction will occur.
28 kRx-792 (En)