Kenwood KR-770 Instruction Manual

AM-FM STEREO RECEIVER
KR-770
INSTRUCTION MANUAL
CONTENTS
CONTROLS . INDICATORS AND CONNECTORS
SAFETY PRECAUTIONS .... .. .. ...... . ...... ..... .. .
SYSTEM CONNECTION DIAGRAM ...... ..... ... ....... ..... .
SYSTEM CONNECTIONS . . .. . . .. ..... .. ... .. . .. ... ...... .
OPERATING INSTRUCTIONS .. ... ..... ......... ..... ... .. .. ... . .
IN CASE OF DIFFICULTY ........... ..... .. ... .... .. ... .... .. .. . .
SPECIFICATIONS .... ...... .. .......... .. ..... ... .... .... .
MEMO . . ........ . ... .... . ..
FOR YOUR RECORDS
2
4
4
5
7
9
10
1 1
Record the serial number. found on the back of the
unit. in the spaces designated on the warranty card . and in
the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for
information or service on this product.
Model KR-770 Serial number _ _ _ __ _ _ _ _ _
UNPACKING
Unpack the unit carefully and make sure that all
accessories and cables are put aside so they will not be lost.
Examine the unit for any possibility of shipping
damage. If your unit is damaged or fails to operate , notify
your dealer immediately. If your unit was shipped to you di-
rectly, notify the shipping company without delay. Only the
consignee (the person or company receiving the unit) can file
a claim against the carrier for shipping damage.
We recommend that you retain the original carton and
packing materials for use should you transport or ship the
unit in the future .
INSTALLATION PRECAUTIONS
(a) Avoid locations subject to direct sunlight.
(b) Avoid high or low temperature extremes.
(c) Keep the unit away from heat radiating sources.
(d) Choose a location that is relatively free of vibration or
excessive dust.
(e) Make sure power is off before making any system con-
nections.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
,·-
$KENVVOOD
_ .. ----~~-POR;;NT~-~
U.S.A. AND CANADA
i
Units shipped to the U.S.A . and Canada are designed
!
for operation on 120 volts AC only. These units are
not equipped with an AC Voltage Selector switch and
the discussion of such a switch that follows should be
disregarded.
ALL OTHER COUNTRIES
I
Units shipped to countries other than the U .S.A . and
!
I Canada are equipped with an AC Voltage Selector 1
L:
1tch on the rear panel Refer to the following pa-
!
graph for the proper setting of this switch . •
i
- -
...
- -
.
-
AC VOLTAGE SELECTION
This unit operates on 120. 220. or 240 volts AC . The
AC Voltage Selector Switch on the rear panel is set to the
voltage that prevails in the area to which the unit is shipped .
Before connecting the power cord to your AC outlet. make
sure that the setting position of this switch matches your
line voltage . If not. it must be set to your voltage in accor-
dance with the following direction .
Note : - -- - - - - - -- - - -- - - - -- -
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC Voltage Selector Switch .
' " "" ''""il"
AC 120V ~
Position
•
AC 220V ~
Posit ion
AC 240V ~
Position
Leve r
I
io
•
J@
1. Remove screw and stopper plate .
2 . Sl ide lever to you r line voltage .
3 . Lock lever with stopper plate
and screw .
AC VOLTAGE SELECTOR SWITCH