Table of Contents
Advertisement
AI Dash Cam User Operating Manual
2 'Quick Start' Guide
The Quick Start guide is intended to get you up and running with your new AI Dash Cam
system and assumes that the device has been installed in your vehicle by a Gatekeeper
Installation Technician. If you prefer to mount the device yourself, please refer to the
Cam Installation
Instructions' section for detailed hardware and cabling instructions.
2.1 Step 1: Powering the AI Dash Cam On and Off
Turning on your vehicle ignition will power up the AI Dash Cam. Turning off your vehicle will
power down the device after a five-minute shutdown delay. (Note: The duration of the five-
minute shutdown can be modified using the device configuration settings.)
2.2 Step 2: Identifying the AI Dash Cam Network Broadcast ID (SSID)
Before a Wi-Fi connection can be established with the AI Dash Cam, you must first identify
the device's network broadcast ID (or SSID). The default SSID is identified on the sticker
attached to the casing of your AI Dash Cam device. Make sure you have correctly identified
the SSID before proceeding.
Windshield Mount
This is the Windshield Mount with 3M
adhesive to attach window.
Allen key and Crowbar
This is the Allen key for inserting SD card
and connecting USB cable.
Alcohol Pad
The is the 75% Ethyl Alcohol for disinfection
use.
'AI Dash
8 of 51
Advertisement
Table of Contents
