Gatekeeper AI User's Operating Manual page 34

AI Dash Cam User Operating Manual
Serial ports to enable
▪
sensor connectivity.
Serial ports to enable
▪
sensor connectivity.
Speed parameters,
▪
including units and
source.
Location parameters,
▪
including distance and
timing
Vehicle mileage
▪
parameters defined
Temperature
▪
parameters included
Fahrenheit, and Celsius
Configuring Image
Upload Parameters and
Capture Times
Options to enable/
▪
disable Time Snap
Configure Image
▪
Upload Link
Preferences Collection
➔
Default: 232-1 RWATCH 57600
Preferences ➔ Collection
Default:
Name Type
Device1 None
Device2 None
Device3 None
Device4 None
Port Channel
9006
0
0
0
Preferences ➔ Collection
Default: Unit: MPH
Source: Satellite
Preferences Collection
➔
Default: Navigation Mode: GPS
Preferences ➔ Collection
Default: Base Value: 0 Mile
Preferences ➔ Collection
Default: Temperature: Fahrenheit (℉)
Preferences ➔ Collection
Default: Time Snap: Disable
Preferences ➔ Collection
Default: Alarm Image Upload Settings
Image Upload Link: Setup
Manual Image Upload Settings
Image Upload Link: Setup
General Serial Port
➔ ➔
➔ General ➔ Network
Sub Type IP
None 192.168.1.100
None 0.0.0.0
None 0.0.0.0
None 0.0.0.0
Search Debug
➔ General ➔ Speed
General Location
➔ ➔
➔ General ➔ Mileage
➔ General ➔ Unit
➔ Snap Setting ➔ Time Snap
➔ Snap Setting ➔ Trigger Snap
34 of 51