Appendix; Requirements Of; Alibration By Veyes - Gatekeeper AI User's Operating Manual

AI Dash Cam User Operating Manual

Appendix

Calibration using Veyes
Before taking the calibration step, users must set the channel usage first.
1. Go to Preferences> Alarm>AI>Algorithm Calibration. Set Channel1 to ADAS, Channel2
to DSM.
Note: Both Channel1 and Channel2 should be set to Normal mode. The alarm only be
triggered in Normal mode.
2. If you need to see the calibration lines on screen, you need to switch to "Calibration" mode.
The calibration line help installer identifies the installation position.
Normal Mode Calibration Mode
11.1 Requirements of ADAS setting in AI Calibration by Veyes
1. When you have AI Dash cam connected to Veyes, go to Preview, click on 'AI Calibration' for
calibration selection.
46 of 51