1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Single board computers
  5. IB961
  6. User manual

IBASE Technology IB961 User Manual

13th generation intel core i7/i5/i3 series 3.5" disk-size sbc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IB961
®
13th Generation Intel
Core™ i7/i5/i3 Series
3.5" Disk-Size SBC
User's Manual
Version 1.0
(September 2023)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB961 and is the answer not in the manual?

Questions and answers

Related Manuals for IBASE Technology IB961

Summary of Contents for IBASE Technology IB961

  • Page 1 IB961 ® 13th Generation Intel Core™ i7/i5/i3 Series 3.5" Disk-Size SBC User’s Manual Version 1.0 (September 2023)
  • Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”). Disclaimer IBASE reserves the right to make changes and improvements to the products described in this document without prior notice.
  • Page 3 0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by weight (100 ppm). • Lead (Pb) • Mercury (Hg) • Cadmium (Cd) • Hexavalent chromium (Cr6+) • Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) IB961 User’s Manual...
  • Page 4 There is danger of explosion if the internal lithium-ion battery is replaced by an incorrect type. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions or recycle them at a local recycling facility or battery collection point. IB961 User’s Manual...
  • Page 5 Detailed description of the problem • The error messages in text or in screenshots if there is any • The arrangement of the peripherals • Software in use (such as OS and application software, including the • version numbers) IB961 User’s Manual...

  • Page 6: Table Of Contents

    Chapter 4 BIOS Setup............47 Appendix ..................75 I/O Port Address Map ................ 76 Interrupt Request Lines (IRQ) ............77 Watchdog Timer Configuration ............78 Onboard Connector Reference Types ..........82 USB Power Control Bit ..............82 IB961 User’s Manual...

  • Page 7: Chapter 1 General Information

    Chapter 1 General Information The information provided in this chapter includes: Features • • Packing List Optional Accessories • Specifications • • Block Diagram Board Pictures • • Board Dimensions...

  • Page 8: Introduction

    Two Intel® PCI-E 2.5G LAN ensures high-speed networking for seamless data transfer. Equipped with 3x USB 2.0, 3x USB 3.2, 2x COM, and 2x SATA III ports, the IB961 offers exceptional peripheral connectivity, and 3x M.2 slots (M-Key + E-key + B-key) enhances expandability options.

  • Page 9: Packing List

    General Information Packing List Your IB961 package should include the items listed below. If any of the items below is missing, contact the distributor or dealer from whom you purchased the product. IB961 SBC • Disk • (including chipset drivers and flash memory utility) This User’s Manual...

  • Page 10: Specifications

    Yes (256 segments, 0, 1, 2…255 sec / min) H/W Monitor Power +12V (-10% tolerance) ~ +24V (+10% tolerance) DC-in Requirement fTPM iAMT 16.1 Dimensions 102.22 x 147.01 mm (4.02” x 5.8”) RoHS 2 Certification CE, FCC Class B IB961 User’s Manual...
  • Page 11 • Operation: 0 ~ 60 °C (32 ~ 140 °F) Temperature • Storage: -20 ~ 80 °C (-4 ~ 176 °F) Relative 0 ~ 90 %, non-condensing at 60 °C Humidity All specifications are subject to change without prior notice. IB961 User’s Manual...

  • Page 12: Block Diagram

    Block Diagram IB961 User’s Manual...

  • Page 13: Board Pictures

    General Information Board Pictures Top View Bottom View IB961 User’s Manual...

  • Page 14: Dimensions

    I/O View Dimensions IB961 User’s Manual...

  • Page 15: Chapter 2 Hardware Configuration

    Hardware Configuration This section provides information on jumper settings and connectors on the IB961 in order to set up a workable system. On top of that, you will also need to install crucial pieces such as the CPU and the memory before using the product.

  • Page 16: Essential Installations

    Essential Installations 2.1.1 Installing the Memory The IB961 supports one memory socket for DDR5 modules. To install a module, locate the memory slot on the board and perform the following steps: Align the key of the memory module with that on the memory slot and insert the module slantwise.

  • Page 17: Setting The Jumpers

    Hardware Configuration Setting the Jumpers Set up and configure your IB961 by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. Jumpers are short-length conductors consisting of several metal pins with a non-conductive base mounted on the circuit board.

  • Page 18: Jumper & Connector Locations

    Jumper & Connector Locations IB961 User’s Manual...

  • Page 19: Jumpers Quick Reference

    Power Selection LVDS Power Selection Clear CMOS Data Flash Descriptor Security Override AT/ATX Selection LVDS Brightness Power Selection Sierra EM919x 5G card USB/PCIe Select 2.4.1 JP1: Clear RTC Data Function Pin closed Setting Normal Clear RTC IB961 User’s Manual...
  • Page 20 2.4.2 JP2: eDP Power Selection Function Pin closed Setting 3.3V (default) 2.4.3 JP3: LVDS Power Selection Function Pin closed Setting 3.3V (default) IB961 User’s Manual...
  • Page 21 Hardware Configuration 2.4.4 JP4: Clear CMOS Data Function Pin closed Setting Normal Clear CMOS 2.4.5 JP5: Flash Descriptor Security Override Remarks: Factory use only IB961 User’s Manual...
  • Page 22 2.4.6 JP6: AT/ATX Selection Function Pin closed Setting Open (default) Close 2.4.7 JP7: LVDS Brightness Power Selection Function Pin closed Setting 3.3V (default) IB961 User’s Manual...
  • Page 23 Hardware Configuration 2.4.8 JP8: Sierra EM919x 5G card USB/PCIe Select Function Pin closed Setting (default) PCIe IB961 User’s Manual...

  • Page 24: Connectors Quick Reference

    LVDS CH-A Connector M.2 B-Key 3052 Socket SMBUS Connector LVDS Backlight Connector SATA Power Connector USB2 #5/#6 Connectors DC-In Connector Front Panel Connector COM2 Serial Port M.2 M-Key 2280 Socket M.2 E-Key 2230 Socket CPU_FAN1 CPU Fan Power Connector IB961 User’s Manual...
  • Page 25 Hardware Configuration Function Connector Dual 2.5 GbE Ports USB Ports CN6, CN5 COM1 Serial Port DisplayPort CN8, CN9 IB961 User’s Manual...
  • Page 26 AUXP eDP Vcc AUXN Ground Ground +3.3V Ground EDP BKLT (+12V) Ground Hot Plug detect Ground Ground TXN3 TXP3 Back Light Control Ground Back Light Enable TXN2 EDP BKLT (+12V) TXP2 +3.3V Ground Ground TXN1 TXP1 Ground IB961 User’s Manual...
  • Page 27 Hardware Configuration 2.5.2 CN2, CN3: SATA #0 / #1 Ports Assignment Assignment Ground Ground Ground Ground 2.5.3 CN4: 2.5G LAN i226LM/i226V Ports IB961 User’s Manual...
  • Page 28 2.5.4 CN5: USB3 #1 / #2 Ports 2.5.5 CN6: USB3 #3 / USB2 #4 Ports 2.5.6 CN7: COM1 Serial Port IB961 User’s Manual...
  • Page 29 Hardware Configuration 2.5.7 CN8, CN9: DP++ Ports Assignment Assignment LAN0_P LAN3_N LAN0_N CONFIG LAN1_P AUXP LAN1_N LAN2_P AUXN Hot Plug LAN2_N LAN3_P IB961 User’s Manual...
  • Page 30 2.5.8 CN10: SIM Socket 2.5.9 J1: SPI Flash Connector * Factory use only IB961 User’s Manual...
  • Page 31 Hardware Configuration 2.5.10 J2: Audio Connector * HK_DF11-12S-PA66H Assignment Assignment LINE OUT_L LINE OUT_R FRONT_JD LINE IN_L LINE IN_R LINE _JD MIC_L MIC_R MIC_JD 2.5.11 J3: DDR5 SO-DIMM Socket IB961 User’s Manual...
  • Page 32 2.5.12 J4: LVDS CH-B Connector * Hirose_DF20G-20DP-1V(56 Assignment Assignment TX0P TX0N TX1P TX1N TX2P TX2N CLKP CLKN TX3P TX3N +3.3V +3.3V IB961 User’s Manual...
  • Page 33 Hardware Configuration 2.5.13 J5: Battery Connector 2.5.14 J6: Digital I/O (4in, 4out) Connector * E-Call_0196-01-200-100 Assignment Assignment Ground Out3 Out1 Out2 Out0 IB961 User’s Manual...
  • Page 34 2.5.15 J7: eSPI Debug Connector * Factory use only 2.5.16 J8: LVDS CH-A Connector * Hirose_DF20G-20DP-1V(56 Assignment Assignment TX0P TX0N TX1P TX1N TX2P TX2N CLKP CLKN TX3P TX3N +3.3V +3.3V IB961 User’s Manual...
  • Page 35 Hardware Configuration 2.5.17 J9: M.2 B-Key 3052 Socket 2.5.18 J10: SMBUS Connector Assignment VCC3 SMB_CLK SMB_Data Ground IB961 User’s Manual...
  • Page 36 2.5.19 J11: LVDS Backlight Connector * E-Call_0110-161-040 Assignment +12V Backlight Enable Brightness Control IB961 User’s Manual...
  • Page 37 Hardware Configuration 2.5.20 J13: SATA Power Connector * E-Call_0110-071-040 Assignment +12V IB961 User’s Manual...
  • Page 38 2.5.21 J14: USB2 #5/#6 Connectors * HK_DF11-8S-PA66H Assignment Assignment USB_PN USB_PP USB_PP USB_PN 2.5.22 J15: DC-In Connector * HK_WAFER396-2S-WV Assignment DC_IN IB961 User’s Manual...
  • Page 39 Orientation is not required when making a connection to this header. Power LED: Pins 7 and 8 • This connector connects to the system power LED on control panel. This LED will light when the system turns on. IB961 User’s Manual...
  • Page 40 2.5.24 J17: COM2 Serial Port * HK_DF11-10S-PA66H Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground IB961 User’s Manual...
  • Page 41 Hardware Configuration 2.5.25 J18: M.2 M-Key 2280 Socket 2.5.26 J19: M.2 E-Key 2230 Socket * With CNVI support IB961 User’s Manual...
  • Page 42 2.5.27 CPU_FAN1: CPU Fan Power Connector * PWM Only Assignment Ground +12V Rotation detection Control IB961 User’s Manual...

  • Page 43: Chapter 3 Drivers Installation

    Chapter 3 Drivers Installation This chapter introduces installation of the following drivers: ® Intel Chipset Software Installation Utility • • VGA Driver HD Audio Driver • LAN Driver • ® Intel Management Engine Drivers •...

  • Page 44: Introduction

    INF files for Plug & Play function for Intel chipset components. Follow the instructions below to complete the installation. Run the drivers disk. Click Intel on the left pane and then Intel(R) RaptorLake-P/PS/U Chipset Drivers on the right pane. IB961 Series User’s Manual...
  • Page 45 Click Intel(R) Chipset Software Installation Utility. ® When the Welcome screen to the Intel Chipset Device Software appears, click Next to continue. Accept the software license agreement. On the Readme File Information screen, click Install. After completing the installation, click Finish to complete the setup process.

  • Page 46: Vga Driver Installation

    VGA Driver Installation Run the drivers disk. Click Intel on the left pane and then Intel(R) RaptorLake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) HD Graphics Driver. Click Begin installation. IB961 Series User’s Manual...
  • Page 47 Click I agree in the INTEL SOFTWARE LICENSE AGREEMENT screen. Click Start to install the graphics driver. When installation has been completed, click Finish.

  • Page 48: Hd Audio Driver Installation

    RaptorLake-P/PS/U Chipset Drivers on the right pane. Click Realtek High Definition Audio Driver. On the Welcome screen of the InstallShield Wizard, click Next. Click Next until installation starts. After completing the installation, click Finish to restart the computer. IB961 Series User’s Manual...

  • Page 49: Lan Driver Installation

    LAN Driver Installation Run the drivers disk. Click Intel on the left pane and then Intel(R) RaptorLake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) PRO LAN Network Drivers.. On the Network Connections screen, click Install Drivers and Software.
  • Page 50 On the Setup Options screen, click the checkbox to select the desired driver(s) for installation. Then click Next to continue. On the Ready to Install the Program screen, click Install to begin the installation. When the Install wizard has completed the installation, click Finish. IB961 Series User’s Manual...

  • Page 51: Intel® Management Engine Components Drivers Installation

    Intel® Management Engine Components Drivers Installation Run the drivers disk. Click Intel on the left pane and then Intel(R) RaptorLake-P/PS/U Chipset Drivers on the right pane. Click Intel(R) ME Drivers.
  • Page 52 When the Welcome screen appears, click Next. Accept the license agreement and click Next. After Intel Management Engine Components have been successfully installed, click Finish. IB961 Series User’s Manual...

  • Page 53: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: Main Settings • Advanced Settings • Chipset Settings • Security Settings •...
  • Page 54 These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. IB961 Series User’s Manual...
  • Page 55 BIOS Setup 4.3 Main Settings BIOS Setting Description Sets the date. Use the <Tab> key to switch System Date between the Date elements. Set the time. Use the <Tab> key to switch System Time between the Time elements. IB961 User’s Manual...
  • Page 56 4.4 Advanced Settings This section allows you to configure system features according to your preference. IB961 Series User’s Manual...
  • Page 57 Configure ACPI objects for wireless devices Default: Disabled WWAN Configure WWAN related options. Configuration WWAN Device: enable or disable M.2 WWAN device WWAN Device Select the M.2 WWAN device options to enable 4G- 7360/7560 (Intel) 5G – M80 (MediaTek) modems. IB961 User’s Manual...
  • Page 58 Active Processor Number of E-cores to enable in each processor Cores package. Note: Number of cores and E-cores are looked at together. When both are (0,0), Pcode will enable all cores. Hyper-Threading Options; Enabled or Disabled IB961 Series User’s Manual...
  • Page 59 Enabling will expose the CPPC v2 interface Technology to allow for hardware controlled P-states. Enable/disable processor turbo mode (requires Turbo Mode EMTTM enabled too. AUTO means enabled. Config TDP Configurable processor base power (cTDP) Configuration configurations. IB961 User’s Manual...
  • Page 60 IB961 Series User’s Manual...
  • Page 61 BIOS Setup IB961 User’s Manual...
  • Page 62 4.4.4 PCH-FW Configuration IB961 Series User’s Manual...
  • Page 63 TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support to TPM 2.0 devices. Auto will Device Select support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated. IB961 User’s Manual...
  • Page 64 Enables / Disables the system ability to hibernate Enable Hibernation (OS/S4 Sleep State). This option may be not effective with some OS. Select the highest ACPI sleep state the system ACPI Sleep State will enter when SUSPEND button is pressed. IB961 Series User’s Manual...
  • Page 65 600, 1024 x 768, 1280 x 768, 1280 x 800, 1280 Panel Type x 960, 1280 x 1024, 1366 x 768, 1440 x 900, 1600 x 900, 1600 x 1200, 1680 x 1050, 1920 x 1080, 1920 x 1200 LVDS Brightness Options: Level-1 to Level-8 Level Control IB961 User’s Manual...
  • Page 66 4.4.8 F81804 Super IO Configuration BIOS Setting Description Sets parameters of serial ports. Serial Ports Enables / Disables the serial port and select an Configuration optimal setting for the Super IO device. Serial Port 1 Configuration IB961 Series User’s Manual...
  • Page 67 BIOS Setup Serial Port 2 Configuration IB961 User’s Manual...
  • Page 68 Enables / Disables smart fan control. Control These fields are the parameters of the hardware Temperatures / monitoring function feature of the motherboard. Voltages The values are read-only values as monitored by the system and show the PC health status. IB961 Series User’s Manual...
  • Page 69 Max.time the device will take before it properly Device power-up reports itself to the Host Controller. ‘Auto’ uses delay default value: for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor. IB961 User’s Manual...
  • Page 70 PXE boot wait time the PXE boot. Use either +/- or numeric keys to set the value Number of times the presence of media will be Media detect count checked. Use either +/- nurmeric keys to set the value. IB961 Series User’s Manual...
  • Page 71 BIOS Setup 4.4.12 NVMe Configuration IB961 User’s Manual...
  • Page 72 4.5 Chipset Settings 4.5.1 System Agent (SA) Configuration IB961 Series User’s Manual...
  • Page 73 BIOS Setup 4.5.1.1. Graphics Configuration and VMD Setup IB961 User’s Manual...
  • Page 74 IB961 Series User’s Manual...
  • Page 75 BIOS Setup 4.5.2 PCH-IO Configuration 4.5.2.1 SATA and RST Configuration: IB961 User’s Manual...
  • Page 76 SATA and RST SATA device options and settings Configuration SATA Controller(s) Enables / Disables the Serial ATA. Power-On after Power Specify what state to go to when power is failure re-applied after a power failure (G3 state). IB961 Series User’s Manual...
  • Page 77 Forces system to user mode. Install factory default Keys Secure Boot key databases. Reset to Setup Delete all Secure Boot key databases from NVRAM Mode Key Management Enables expert users to modify Secure Boot Policy variables without full authentication. IB961 User’s Manual...
  • Page 78 Number of seconds to wait for setup activation Timeout key. 65535 (0xFFFF) means indefinite waiting. Bootup NumLock Selects the keyboard NumLock state. State Quiet Boot Enables / Disables Quiet Boot option. FIXED BOOT ORDER Sets the system boot order. Priorities IB961 Series User’s Manual...
  • Page 79 Saves the changes done so far as User Defaults. Restores the user defaults to all the setup Restore User Defaults options. Attempts to launch EFI shell application Launch EFI Shell from (Shell.efi) from one of the available filesystem filesystem device devices. IB961 User’s Manual...
  • Page 80 4.9 MEBx IB961 Series User’s Manual...

  • Page 81: Appendix

    Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration.

  • Page 82: I/O Port Address Map

    Programmable interrupt controller 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller 0x000003F8-0x000003FF Communications Port (COM1) 0x000002F8-0x000002FF Communications Port (COM2) IB961 User’s Manual...

  • Page 83: Interrupt Request Lines (Irq)

    IRQ 0 System timer IRQ 4294967262 Intel(R) UHD Graphics Intel(R) USB 3.10 eXtensible Host Controller - 1.20 IRQ 4294967291 (Microsoft) IRQ 4294967293 Intel(R) PCI Express Root Port #8 - 51BF IRQ 4294967265~77 Intel(R) Ethernet Controller I226-V #7 IB961 User’s Manual...

  • Page 84: Watchdog Timer Configuration

    **endptr; char SIO; printf("Fintek 81866 watch dog program\n"); SIO = Init_ F81804(); if (SIO == 0) printf("Can not detect Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); IB961 User’s Manual...
  • Page 85 Set_ F81804_LD(0x07); //switch to logic device 7 bBuf = Get_ F81804_Reg(0xFA); bBuf &= ~0x01; Set_ F81804_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_ F81804_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_ F81804_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- IB961 User’s Manual...
  • Page 86 (result); //--------------------------------------------------------------------------- void Unlock_ F81804 (void) outportb( F81804_INDEX_PORT, F81804_UNLOCK); outportb( F81804_INDEX_PORT, F81804_UNLOCK); //--------------------------------------------------------------------------- void Lock_ F81804 (void) outportb( F81804_INDEX_PORT, F81804_LOCK); //--------------------------------------------------------------------------- void Set_ F81804_LD( unsigned char LD) Unlock_ F81804(); outportb( F81804_INDEX_PORT, F81804_REG_LD); outportb( F81804_DATA_PORT, LD); Lock_ F81804(); IB961 User’s Manual...
  • Page 87 #define F81804_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81804_UNLOCK 0x87 #define F81804_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_ F81804(void); void Set_ F81804_LD( unsigned char); void Set_ F81804_Reg( unsigned char, unsigned char); unsigned char Get_ F81804_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81804_H IB961 User’s Manual...

  • Page 88: Onboard Connector Reference Types

    Dupont Dupont Digital I/O 2.00 mm-pitch 2.00 mm-pitch pin header (Male) (Female) E-CALL Backlight 0110-161-040 PHR-4. Hirose Hirose LVDS J4, J8 DF20G-20DP-1V DF20A-20DS-1C USB Power Control Bit Function Connector Software Mapping USB 3.1 CN6 (A, B) Bit_0 IB961 User’s Manual...

Table of Contents