Table of Contents
Advertisement
The time indications are based on stopped operation. When the indicated number of working hours is not
achieved during the related period, the period can be extended. However, a full overhaul must be carried out
at least once a year, consisting of inspection of filters for damage, air tightness of the machine and proper
function of the control mechanism. Speak to your Husqvarna dealer for technical inspection. The electrical
cabinet shall be checked only by trained personnel. Make sure that the machine is turned off.
Pay attention to unusual noises or strong vibrations. Do a check for the cause of every big change. Speak to a
technician if you have doubts about the cause or when a repair without a technician seems not possible. Only
use genuine Husqvarna spare parts.
There are different working conditions and it is difficult to foreseen the frequency of inspections for wear checks,
maintenance and repair works. Prepare a suitable inspection schedule based on your own working conditions
and experience. A full overhaul must be carried out at least once a year.
Clean the machine with the dust collector after each usage of the machine.
Make sure that there are no wastes or fibre residues in the area of the grinding discs.
Our specialists are ready to assist you with more advice.
Prior to any repair works on the machine and its drives, safe the machine against unintentional stop.
Follow additional operating and maintenance instructions of Original Equipment Manufacturers if included
during your service and maintenance work.
All repair work must to be done by qualified Husqvarna personnel, this to guarantee a safe and reliable
machine.
Any guarantee on the machine is automatically void when:
•
Non original Husqvarna parts and or diamond discs have been used.
•
Repair work is not done by qualified Husqvarna personnel.
•
Changes, add items, or conversions are done without the written permission from Husqvarna.
Further is advised:
Store the cleaned and dry machine in a dry and humid-free room. Protect the electrical motor from moisture,
heat, dust and shocks.
•
Prevent premature wear by keeping the machine as dust free as possible, for these reasons clean the
machine regularly with a vacuum cleaner.
•
Clean the machine every day with air and non-aggressive materials.
•
Never use a high pressure water cleaner to clean the machine.
•
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motor from
moisture, heat, dust and shocks.
Work only with original Husqvarna parts.
•
Dust in the electrical box can damage the frequency inverter. Clean the electrical box every day from
inside and outside.
•
Clean the fans and filters from the inside of the electro box with compressed air and a vacuum cleaner
towards the outside air.
•
Do a check regularly to see if the diamond wings are in good condition. Replace immediately when these
are damaged or worn out.
34
Disconnect the power supply and main switches.
21.07.2023
Advertisement
Table of Contents
