URBAN OUTFITTERS MINIMALIST 68968148 Assembly Instructions Manual

MINIMALIST PLINTHE BED
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Phillips head screwdriver
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1) Head and Foot Rail x2
(Wrapped in green tape)
(4) Center Leg 3x (Wrapped
in green tape)
A) Allen Bolt
[8mm x 20mm] x8
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
2) Side Rail x2
(Wrapped in green tape)
B) Washer
[8mm x 17mm] x8
(3) Center Support x1 (Wrapped
in green tape)
(5) Slats 2x
(Wrapped in green tape)
C) Allen Bolt
[8mm x 65mm] x5
(D) Allen Key
[5mm] x1
Page 1 of 6