Flushing The Appliance - Philips HD7900 Manual

5 Press the timer button to confirm the minutes.
-
The current time is now set and saved.
6 To adjust timer in standby mode, you can choose between two approaches
below:
-
Plug off the appliance and and plug in again.
-
Press and hold timer button until hour digits starts flash.
Note
The appliance always saves the last setting.
Keep warm time
You can choose how long you want your coffee to stay hot after brewing by
adjusting the time after the appliance automatically switches off. The default
automatic switch-off time is 30 minutes. The maximum automatic switch-off
time is 300 minutes.
To adjust the automatic switch-off time, follow the steps below:
1 Power off the appliance and keep it plugged.
2 Press and hold cleaning button until keep warm icon is shown and hour starts
flash.
3 Follow step in "Setting the clock" to complete setting.

Flushing the appliance

Always flush the coffeemaker once before first use by following the steps below.
Warning: Never pour water into the bean container, as this
damages the coffeemaker.
1 Open the water reservoir lid.
Caution: Do not put coffee beans or pre-ground coffee in the water
reservoir
2 You can fill the water reservoir with water in either way below:
English
11