Troubleshooting - Frigidaire FRG612SC User Manual

Table of Contents

Advertisement

WARNING!
Refer to Safety chapters.
What to do if...
PROBLEM
The oven does not heat up.
The oven does not heat up.
The oven does not work.
The lamp does not work.
Steam and condensation
settle on the food and in the
oven cavity.
The flame extinguishes im-
mediately after ignition.
The turnspit does not rotate. The turnspit is not correctly
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
POSSIBLE CAUSE
The oven is off.
The fuse is blown.
The automatic ignition does
not work.
The lamp is broken.
A dish was left in the oven
for too long.
The thermocouple is not
heated up.
installed into the turnspit
hole.
The necessary data for the service centre
is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not
remove the rating plate from the oven
cavity.

TROUBLESHOOTING

REMEDY
Turn on the oven.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse problem re-
curs, contact a qualified
electrician.
Light the burner with a long
match. Hold the flame near
the hole in the bottom of the
oven cavity. At the same
time push the knob for the
gas control and turn it coun-
terclockwise to the maxi-
mum temperature. When
the flame lights, keep the
knob for the gas control
pushed for 15 seconds or
less to warm up the thermo-
couple. Otherwise the gas
flow is interrupted.
Replace the lamp.
Food should not be left in
the oven for longer than
15-20 minutes after cooking.
After the flame lights, keep
the knob for the gas control
pushed for 15 seconds or
less.
Refer to "Using the accesso-
ries" chapter, Using the turn-
spit.
29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FRG612SC and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents