Table of Contents
Advertisement
Changing the Oven Light bulb
CAUTION
First make sure the oven is unplugged before
proceeding to change the bulb.
WARNING
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of
electric shock.
The replacement bulb must be resistant to temperatures
up to 300ºC. You can order one from the Technical
Assistance Service.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not operate.
The lamp does not operate.
1
Loosen the lens from
the lampholder with the
help of the appropriate
tool.
Possible cause
The oven is deactivated.
The fuse is released.
The automatic ignition does not
work.
The lamp is defective.
2
Exchange the bulb.
Replace the lens, making
sure it fits in the correct
position without forcing
it.
Remedy
Activate the oven.
Make sure that the fuse is the cause
of the malfunction. If the fuse
releases again and again, contact a
qualified electrician.
Ignite the burner manually with a
long match. Hold the flame near the
hole in the bottom of the oven
cavity. At the same time push the
knob for the gas control and turn
it counterclockwise to the maximum
temperature. When the flame comes
on, keep the knob for the gas
control pushed for 15 seconds or
less to let the thermocouple warm
up. If not, the gas flow is
interrupted.
Replace the lamp.
17
Advertisement
Table of Contents
