Table of Contents
Advertisement
• Optical drive
• Slim-optical-drive adapter
• Storage drive bracket
Note: The following instructions on how to remove or install an optical drive also apply to other supported
devices in the flex bay.
To remove or install an optical drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 55.
2. Remove the front bezel. See "Front bezel" on page 57.
3. If you are removing an optical drive, do the following:
a. Disconnect cables from the rear of the optical drive, press the release button
optical drive out of the chassis.
Figure 29. Removing the optical drive
b. Remove the optical-drive retainer from the left side of the optical drive.
4. If you are installing an optical drive, do the following:
68
P520c User Guide
1
, and then slide the
Advertisement
Table of Contents
