Table of Contents
Advertisement
Before First Use
You must allow the fridge to settle for at least twenty-four hours prior to
switching the power on.
It is recommended that you clean the interior of the appliance prior to first use,
using a solution of bicarbonate of soda and warm water and then thoroughly
drying the interior.
The fridge may have an odour to it at first use. This will disappear as the
appliance cools.
When first switching the appliance on the fridge will default to 5°C and the freezer
to -18°C. The figure in the digital display for freezer temperature will flash until the
temperature drops below 0°C.
Please note:
The appliance will work continuously until it comes down to the
correct temperature.
If the appliance is switched off, you should allow five minutes before switching
it on again to prevent unnecessary damage to the compressor.
Never store inflammable or explosive items and strong corrosive acids or
alkalis in the appliance.
This fridge cools your food by making the inside back of the cavity cold.
It is normal for frost to build up on this surface; it then dissipates and drains
through a small drain at the bottom, where it evaporates harmlessly.
The presence of frosting at the back is not a malfunction of the fridge.
The fridge freezer is likely to make all manner of noises such as bubbling, clicking,
cracking and hissing which is all quite normal in the running of this model.
6
www.cda.co.uk
Advertisement
Table of Contents
