Threading Welding Wire - Craftsman 117.205710 Operator's Manual

2-13. Threading Welding Wire

Open pressure assembly.
Close and tighten pressure
assembly, and let go of wire.
Press gun trigger until wire
comes out of gun. Reinstall
contact tip and nozzle.
OM-194 199 Page 11
6 in
(150 mm)
Pull and hold wire; cut off end.
.
Use pressure indicator
Tighten
scale to set a desired
drive roll pressure.
Pressure
1
Indicator
2
3
Scale
4
Remove gun nozzle and contact tip.
Tighten
WOOD
Feed wire to check drive roll pressure.
Tighten knob enough to prevent slipping.
Tools Needed:
Push wire thru guides into gun;
continue to hold wire.
1
2
3
4
Cut off wire. Close
and latch door.
Ref. ST-801 570-A / ST-801 083 / S-0627-A
4 in
(102 mm)
Turn On.