Section 3 - Operation; Front Panel Controls - Craftsman 117.205710 Operator's Manual

3-1. Front Panel Controls

SECTION 3 – OPERATION
Controls For Standard Units
1 Wire Speed Control
Use control to select a wire feed
speed. Scale around control is not
actual wire feed speed, but is for
reference only.
2 Voltage Switch
The higher the selected number,
the thicker the material that can be
welded (see Section 2-14). Do not
switch under load.
3 Power Switch
1
2
3
OM-194 199 Page 14
Ref. ST-180 930