Threading Welding Wire - Craftsman 117.205710 Operator's Manual

2-12. Threading Welding Wire

Tools Needed:
4 in
(102 mm)
6 in
(150 mm)
Open pressure assembly. Pull and hold wire; cut off end. Push wire thru guides into gun;
continue to hold wire.
Tighten
Close and tighten pressure Remove gun nozzle and contact tip. Turn On.
assembly, and let go of wire.
WOOD
Press gun trigger until wire Feed wire to check drive roll pressure. Cut off wire. Close
comes out of gun. Reinstall Tighten knob enough to prevent slipping. and latch door.
contact tip and nozzle.
Ref. ST-801 570 / ST-801 083 / S-0627-A
OM-194 199 Page 11