ProMinent mikro g/5a Instruction Manual page 16

®
ProMinent mikro g/5a
Precision feeding pump
Page 16
4 Capacity, technical data and nomograms
4.1 Determining the capacity
Please note: In order to obtain a balanced setting, the connection line should be as
horizontal as possible, but however choose a somewhat longer stroke length with
a straight numerical value. For high viscosity media and media tending to emit
vapours and fumes select a large stroke length and a low rate. For precise metering
the stroke length should not be below 2%.
Take the value for the stroke length from the left scale "Setting stroke length" and for
the stroke rate from the "Setting stroke rate" on the right.
Set the metering pump accordingly, adjusting the stroke length only once the pump
is operating.
The measurements of the flow rate have been carried out with water.
Instruction manual
mikro g/5a