Disconnecting The Lan Cable - Toshiba Satellite L505-GS5035 User Manual

To connect the LAN cable, follow the steps as detailed below:
1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
3. Plug the other end of the cable into a LAN hub connector or router.
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
When the computer is exchanging data with the LAN, the LAN Active
indicator glows yellow. When the computer is connected to a LAN hub but
is not exchanging data, the Link indicator glows.

Disconnecting the LAN cable

Make sure the LAN Active indicator (amber LED) is out before you
disconnect the computer from the LAN.
To disconnect the LAN cable, follow the steps as detailed below:
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub or router in the same manner.
Check with your LAN administrator and hardware or software vendor
before disconnecting from the hub.
User's Manual
Figure 4-10 Connecting the LAN cable
L500/L505/L500D/L505D
4-29