Toshiba Satellite L505-GS5035 User Manual page 152

L500/L505/L500D/L505D
Additional memory module
Please also refer to Chapter 8,
installing and removing memory modules.
Problem
If there is a memory
malfunction, the
Power indicator will
repeatedly flash (on
for 0.5 seconds, off for
0.5 seconds) in the
following patterns:
If there is an error in
only slot A or no
memory module is
inserted in Slot A:
amber twice, then
green once.
If there is an error in
Slot B: amber once,
then green twice.
If there are errors in
both Slot A and Slot B:
amber twice, then
green twice.
An error will occur if a
memory module is
inserted into Slot B
while no memory
module is inserted in
Slot A.
9-16
Optional Devices, for further information on
Procedure
In the event of Power indicator flashes when the
computer is turned on you should initially ensure
that the installed memory module(s) are
compatible with the computer. If you determine
that an incompatible module has been installed,
you should follow the steps as detailed below:
1. Turn off the computer.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the incompatible memory module.
5. Install the battery and/or connect the AC
adaptor.
6. Turn on the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Remove the memory module from Slot B and
insert it into Slot A.
User's Manual