Page 1
SP-S2-DS Quick Start v1.0, April 2023 Packing List In addition to this guide, the package includes the following items: SP-S2-DS M12A-2P-IP67 Resources How to search for drivers, manuals and spec information on ICP DAS website. Technical Support For Mobile Web service@icpdas.com...
Page 2
Pin Assignment Connecting the SP-S2-DS and iSOS-109 Connect the V+ pin of SP-S2-DS to VCC terminal on EXTin connector of iSOS-109, and connect the V- pin to the GND terminal. Adjust the charging mode(JP2) of iOS-109 to "External power supply...
Page 3
Installing a waterproof connector on SP-S2-DS Step 1: Feed the end of the two core power cable through the Sealing nut, Seal, Clamp Ring, Gasket and Lock Nut. Step 2: Insert two conductors into the holes on the Cord Connector. See the table below for the correct pin-out connections.
Page 4
Step 4: Wrap the Clamp Ring around the Cord Connector. Step 5: Insert the Seal into the Clamp Ring. Step 6: Push the Sealing Nut forward and Hand-tighten it to seal the assembly. Step 7: Wrap the O-Ring around the Cord Connector.