Advertisement
Quick Links
Advertisement
Related Manuals for Lasertec TruPulse L2
Summary of Contents for Lasertec TruPulse L2
- Page 1 ulse ® uick eference ield uide LTI Part #0145007...
- Page 2 LTI Corporate Headquarters LTI YouTube Channel ® 6912 South Quentin Street, Suite A www.youtube.com/lasertechpro Centennial, CO 80112 USA for TruPulse Training Videos ® *For detailed instructions on the TruPulse L2 operations, please refer to www.lasertech.com/laser-distance-measurement and navigate to TruPulse L2 product webpage.
- Page 3 TruPulse ® Measurement Modes Display Icons Display Icons Battery Life Inclination Indicator Slope Laser Firing Distance Horizontal Feet Distance Vertical Meters Distance Degrees Height Percent 2D Missing Line Target Modes Closest Farthest Continuous Filter...
- Page 4 TruPulse L2 Display ® The TruPulse L2 is equipped with a dual color display and can show information in Red or Black. With a built-in light sensor that reads ambient light, the internal software adjusts the red brightness intensity based on the measured light reading.
- Page 5 TruPulse ® Measured by TruPulse Values & Key Code Calculated by TruPulse 1-Shot Distance 2-Shot Missing Line = Horizontal Distance (HD) = Slope Distance ( SD ) = Vertical Distance (VD) = Height (HT) = Inclination (INC) Inclination 2-Shot Height 3-Shot Height Value Measurement...
- Page 6 Change Units of Measurement (UoM) Press-and-hold Display/Menu button then press Up or Down Arrow button to scroll until the UoM option is displayed. The last UoM options chosen will be displayed. Press Display/Menu button to enter option selections, the icon will be displayed indicating the UoM option menu.
- Page 7 Change Units of Measurement (UoM) Continued Press Press Menu Press Hold Button Press Meters/Degrees Meters/Percentage Feet/Degrees Feet/Percentage Press Press Press Press Fire button to select UoM option and ready to take measurement.
- Page 8 Select Targeting Mode The TruPulse L2 has five Target Modes which allow you to select or eliminate targets and to take the most accurate measurements possible in various field conditions. Press-and-hold Display/Menu button then press Up or Down button to scroll to the Target Mode option screen display.
- Page 9 Select Targeting Mode Continued Press Press Press Menu Hold Button Press Standard Filter Farthest Closest Continuous Press Press Press Press...
-
Page 10: Measure Distance
Measure Distance In the Slope Distance Mode , the TruPulse L2 will automatically calculate Measurements are from the 1/4-20 tripod mount (center) of the laser to the target. Press the Up or Down button until screen is displayed. Aim at the target where you have a clear line of sight then press-and-hold the... - Page 11 Measure Distance Continued Press Up or Down buttons to scroll through the other measurement values calculated. Press Fire button to clear measurements and repeat steps 1 through 4. Press Fire button to clear measurements and repeat steps 1 through 4. Helpful Tip The Vertical Distance solution can be used to...
-
Page 12: Basic Measurements
Basic Measurements HUD View Press Fire Button Range Acquired Press Hold Fire Button No Range Acquired... - Page 13 Measure Height (3-pt Routine) This routine is ideal for flat, vertical objects that do not lean. To shoot through brush, use the filter mode, foliage filter and a reflector. Press Up or Down buttons until is displayed. Aim where you have a clear line of sight to the target and press-and-hold fire button The laser indicator will be displayed.
- Page 14 Measure Height (3-pt Routine) Continued Height measurement is calculated , display flashes then solid with calculated height value. Helpful Tip • The laser sensor does not measure when taking the two inclination angle measurements. You do not need a clear line of sight to the bottom or top of your target.
- Page 15 Basic HT Routine Press & Auto Hold Range Sequence Fire Acquired to AnG_1 Button Press Fire Button Auto Auto Press Sequence Sequence Fire to AnG_2 Button Height Result Press Fire Button...
- Page 16 Measure Height in 2-Shots This measurement routine is ideal for leaning objects and requires a clear line of sight for both shots. Press Up or Down buttons until is displayed. Aim where you have a clear line of sight to the target and press-and-hold fire button The laser indicator will be displayed.
- Page 17 Measure Height in 2-Shots Continued The laser indicator will be displayed. When the measurement is acquired will be displayed. Note this value for the Vertical Distance top (VDt) value. Add the two values to calculate the height VDb + VDt = Height.
- Page 18 Measure 2D Vertical Missing Line Press Up or Down buttons until is displayed. Aim where you have a clear line of sight to the target and press-and-hold fire button The laser indicator will be displayed. When the measurement is acquired Shot.1 results will be displayed.
- Page 19 Measure 2D Vertical Missing Line Continued The HD and INC ML values will be calculated and displayed , press up arrow to scroll through the SD and VD ML values from shot 1 to shot 2. Press fire button to return to step 1. Press down arrow to scroll to and re-measure the Shot.2,...
- Page 20 Basic ML Routine Press & Auto Hold Range Sequence Fire Acquired to Shot2 Button Press & Hold Fire Button Auto Press Range Sequence Down Acquired to HD Arrow Results Press Up Arrow For Calculated Measurements Press Down Arrow Press Press Arrow Arrow...
- Page 21 Full Version of the TruPulse L2 Manual www.lasertech.com 1.303.649.1000 info@lasertech.com...