Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lasertec CL3 HYBRID
Summary of Contents for Lasertec CL3 HYBRID
- Page 1 C L 3 H Y B R I D M U L T I - L I N E L A S E R I N S T R U C T I O N M A N U A L...
- Page 2 SAFETY Read the following safety instructions before ▪ Tool service must be performed only by attempting to operate this product. qualified repair personnel. Repairs, service Keep these instructions in a safe place or store or maintenance performed by unqualified in the carry case for future reference. personnel will void the warranty.
- Page 3 WARNING: DO NOT DISASSEMBLE ▪ Do not set up the tool at a position where THE LASER. There are no user serviceable the laser beam can cross any person at head height. parts inside. Disassembling the laser will ▪ Do not let children come in contact with the void all warranties on the product.
-
Page 4: Item Checklist
Please ensure the following items are included with your laser level. If anything is missing please contact your retailer. INCHES INCHES Lasertec CL3 Hybrid 2x laser targets 4x AA alkaline batteries The carry case contains a cut out for an optional multi-purpose... -
Page 5: Laser Overview
LASER OVERVIEW Control panel Horizontal laser port Vertical laser port Power / locking switch Battery door cover 1/4” tripod thread... - Page 6 LASER OVERVIEW: CONTROL PANEL Battery indicator Pulse mode indicator Pulse mode Line mode...
-
Page 7: Detector Overview
DETECTOR OVERVIEW The detector is an optional accessory which It is recommended that a hybrid line detector is can be purchased from your retailer. used with this instrument for compatiblity with both the red and green laser beams. Bubble vial LED direction indicator Laser sensor LED centre indicator... -
Page 8: Using Your Laser
USING YOUR LASER POWER SUPPLY SET UP ▪ The instrument is powered by four AA ▪ Select a place as close as practical to alkaline batteries. the work site. Ensure the location is clear of traffic. BATTERY REPLACEMENT ▪ Place the instrument on a level surface such as a bench or mount. -
Page 9: Operation
OPERATION ▪ To turn the instrument on, slide the power ▪ To lock the beams in place, slide the power / locking switch to the “on” position. Self / locking switch to the ‘lock’ position. The levelling will commence and the horizontal instrument can now be tilted to the desired beam will activate. - Page 10 USING A DETECTOR ▪ Press the pulse mode button on the top of the instrument to enter into pulse mode. ▪ Switch the detector on by pressing the power button. The speaker will beep indicating the instrument is operating. ▪ Move the detector into the path of the laser beam.
-
Page 11: Troubleshooting
TROUBLE SHOOTING Error Cause & Solution ▪ Check the batteries. They may be in the wrong way or need replacing. Laser does not turn on ▪ Check the battery compartment for signs of damage. Ensure they are clean and not bent. ▪... -
Page 12: Care And Maintenance
CARE AND MAINTENANCE ▪ This is a precision measuring instrument ▪ The operator should check the accuracy and should always be handled with care and of the instrument before precision levelling transported within the carry case provided. is attempted. Failure to do so may result in inaccurate measurements. -
Page 13: Warranty
WARRANTY The Lasertec CL3 Hybrid comes with a 3 (three) year manufacturers warranty. AUSTRALIA NEW ZEALAND “Our goods come with guarantees that For more information please visit cannot be excluded under the Australian consumerprotection.govt.nz Consumer Law. You are entitled to a... -
Page 14: Customer Support
CUSTOMER SUPPORT To assist you with any queries or technical questions please contact customer support Australia: 1300 658 338 New Zealand: 0800 367 527... -
Page 15: Specifications
SPECIFICATIONS Specifications Lasertec CL3 Hybrid Product code 91220 Warranty 3 Years Accuracy ±2mm at 10m Operating range 50m (with optional detector) Levelling range ±4° Laser class 2 Red / 3 Green Battery life 10 hours Battery type 4x 1.5v AA... - Page 16 www.s p o to n. c o m .a u...