Page 1
R D R 1 2 M M I L L I M E T R E D E T E C T O R & C L A M P I N S T R U C T I O N M A N U A L...
Page 2
SAFETY Read the following safety instructions before attempting to operate this product. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. WARNING: Read and understand all instructions. ▪ Use the detector only with the specifically designated battery. ▪ Store the detector out of reach of children and other untrained persons.
ITEM CHECKLIST Please ensure the following items are included with your detector. If anything is missing please contact your retailer. Lasertec RDR12M detector Staff clamp Alkaline battery...
PRODUCT OVERVIEW DETECTOR FRONT Laser sensor LCD display screen LED indicator Power on / off Speaker on / off Detection mode Metric or imperial selection (press) Screen backlight (hold)
DISPLAY SCREEN Measurement Plus and minus indicator Arrow indicator Unit Centre alignment Arrow indicator Battery indicator Speaker indicator Brightness indicator Detection mode...
USING YOUR DETECTOR POWER SUPPLY ▪ The instrument is supplied with one 9v alkaline battery as its standard power source. Removing & inserting the alkaline battery ▪ Remove the battery cover door and the battery. ▪ Insert the battery according to polarity and replace the battery door. SET UP Mounting the staff clamp ▪...
Page 8
The detector will emit a constant beep once the level position has been located. ▪ To turn on the backlight, hold down the mode button for approximately 3 seconds. This instrument is compatible with all Lasertec red beam rotary laser levels and most 3rd party red beam laser levels.
Page 9
Detector position for horizontal beams Detector position for horizontal beams...
WARRANTY The Lasertec RDR12M comes with a 1 year manufacturers warranty. AUSTRALIA "Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.