Buttons - Fluke 753 Getting Started

753/754
Getting Started

Buttons

Table 4 tells you about the Product button functions. The softkeys are the four (F1-F4) blue buttons below the display.
Softkey functions are defined by the labels that show above the softkey during operation. Softkey labels and other display
text are shown in this manual in bold type, for example, Choices.
Button
o
Turns the Product on and off.
A
Selects mA (current) measure or source function. For loop power on/off, go to the Setup mode.
v
Selects the dc voltage function in MEASURE mode, or selects dc voltage in SOURCE mode.
t
Selects TC (thermocouple) or RTD (resistance temperature detector) measurement or sourcing functions.
p
Selects the pressure measurement or source function.
W
X
Softkeys. Does the function specified by the label above each softkey on the display.
Y
Z
F
Adjusts the backlight intensity (three levels).
s
Enters and exits Setup mode to change operating parameters.
r
(754)
(754) Toggles between HART communication mode and analog operation. In calculator mode, this key
supplies the square root function.
u
(753)
(753) Adjusts the Range of the Product.
12
Table 4. Buttons
Description