The Mpts Tab; The Ch1/Ch2 Tab (Encode) - Z3 Technology Z3-MVPR-02 User Manual

9.4 The MPTS Tab

*Note: Upcoming release- Combine multiple streams into 1 TS stream.
9.5

The CH1/CH2 Tab (Encode)

Parameter
Video Source
16:9
Video Resolution
Video Bitrate
Video Profile
Frame Rate Divider
Number of B-frames
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
Options (default in bold) Notes
HDMI
Component
Composite
Checked
Unchecked
320x180 – 1920x1080
(1920x1080)
Follow Input
100 – 12000K (8000K)
High
Main
Baseline
1, 2, 4, 6
0 – 2 (0)
th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Selects the input to use. For CH1 there is a choice
of HDMI1/Component1/Composite1. For CH2
there is a choice of
HDMI2/Component2/Composite2. See Section
6.11, "Encoding from Component or Composite In"
on page 28 for a summary of valid combinations.
This can be used for any SD input (NTSC or PAL
coming in through composite or 480i / 480p / 576i
/ 576p coming in through component/HDMI).
When this is checked, the aspect ratio in the
bitstream is set to 16:9. For any HD input this
value is ignored.
The encode resolution. If this resolution is
different from the capture resolution, resizing will
occur. "Follow Input" generates the resolution
based on the capture resolution. [Note 1]
The bitrate.
The H.264 profile of the bitstream. Generally High
is used for 1080p, Main for D1, and Baseline for
<D1.
Used to encode at less than the input frame rate
(for example, an input frame rate of 30fps with a
divider of two would cause an output stream of
15fps). If interlaced input is used then this is used
to reduce the number of fields being encoded.
[Note 2]
The number of B-frames. A value of "0" means B-
41
DOC-USR-0027-10