Figure 19 Changing Ts Rate - Z3 Technology Z3-MVPR-02 User Manual

(27) Once you select UDP, "TS RATE" should appear with the default value of 10000K. Change this to
1000K (see step 5 above).
(28) Click on "start" to start encoding (see step 6 above).
(29) Open VLC to view your UDP stream (Section 6.5) and view the "Statistics" tab (Section 6.7). You
will see a lower value for the overall input rate and for the "content" rate:
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
(2) Change to
"720x480"
(3) Change to
512K

Figure 19 Changing TS Rate

21
th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
(1) Click stop
DOC-USR-0027-10
(5) Change to
1000K
(6) Click start