Table of Contents
Advertisement
8
Installation instructions
Last updated: January 19, 2023 02:00. Revision #10426
1. Firstly, using high quality speaker cable connect the EVO S speakers to the speaker terminals on your amplifier. Ensure that you pay close
attention to match the polarity of each connection.
2. If placed on a desk, or close to a wall you may benefit from using the included foam bass tuning bungs. These can be placed into the rear port of
each speaker to reduce the low frequency output.
3. Finally, when positioning, we would suggest that the distance between speakers and the listening position is equal. However, we would
encourage experimentation until you find a solution that works for your space.
Advertisement
Table of Contents
