This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio’s policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice.
Installation instructions Last updated: January 19, 2023 05:43. Revision #11062 1. Firstly use the included template to mark the position for the mounting hole at the selected location. Note: We recommend the use of a 75mm (3”) downlight hole saw. 2.
Page 7
4. Next, press the metal clips upwards and fit the two longer arms into the ceiling hole. 5. Push the speaker upwards until firmly within the mounting hole.
Technical specifications Last updated: January 19, 2023 05:43. Revision #11063 Sensitivity (SPL) 86dB (2.83 Vrms input) Frequency Response 120Hz - 20kHz Impedance 8 Ohms compatible. Recommended amp power 25-200W. Using a high powered amplifier lower down its volume scale results in lower distortion and better sound. If you hear a distorted sound or mechanical ‘crack’...
Frequently asked questions Last updated: January 19, 2023 05:43. Revision #11064 What is meant by speaker sensitivity? Speaker sensitivity is the level produced by the speaker at one meter, when supplied with one watt of power from an amplifier. It’s a way of describing how well the speaker produces acoustic energy, based on a given input.
Troubleshooting Last updated: January 19, 2023 05:43. Revision #11065 No sound through one or both channels. • Check that the amplifier is turned on. • Ensure that the correct input source is selected on the amplifier. • Confirm that all connections between the amplifier and loudspeakers are secure. •...
Need help?
Do you have a question about the C10704 and is the answer not in the manual?
Questions and answers