Table of Contents
Advertisement
Frame Center Position (Embroidery Unit)
Standard： In the test mode #23, when pressing
1. Remove the presser foot.
2. Turn off the machine, then attach the embroidery unit.
3. Attach the extra large embroidery frame.
*Size: LL,300x180mm (12inch x7inch)
4. Put the embroidery sheet on the frame.
5. Go to the test mode #23.
6. Press
Needle should
be at the center.
drops in the center of embroidery sheet hole.
, and check the needle drop position.
61
1
of 2
, the needle
Advertisement
Table of Contents
