Table of Contents
Advertisement
Standard： The shape of sewn pattern should be meets the standard.
1. Go to the test mode #03, and attach the "N" presser foot.
2. Use the Shappe spun #60 thread, and sew the test pattern
3. Press
OK
One Point Adjustment
to adjust the shape of sewn pattern as below.
NG#1
NG#1
NG#2
NG#1
NG#3
NG#4
Lap : Push vertical
Open : Push vertical
Not align
If lower part short : Push horizon
Not align : Push horizon
If lower part long : Push horizon
59
.
Advertisement
Table of Contents
