Table of Contents
Advertisement
Standard： The difference between the length of forward and
backward feed is within 5 mm.
1. Go to the test mode #13, and attach the "J" presser foot.
2. Press the Start/Stop button. Sewing starts.
3. Loosen the screw (#1), then turn the screw (#2) to adjust the feed length.
*Point: Use one piece of muslin
4. Tighten the screw (#1).
#1
Forward and Backward Feed
#2
fabric.
Loosen these two screws to
move feed dog L/R only
57
OK
OK
Advertisement
Table of Contents
