Section 1: Introduction And Safety; Introduction; Read This Manual Thoroughly; Safety Rules - Generac Power Systems Power Zone 410 Owner's Manual

Section 1: Introduction and Safety

Introduction

Thank you for purchasing a Generac Power Systems,
Inc. product. This unit has been designed to provide high
performance, efficient operation and years of use when
maintained properly.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.

Read This Manual Thoroughly

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
If any section of this manual is not understood, contact
the nearest Independent Authorized Service Dealer
(IASD) or Generac Customer Service at 1-888-436-3722
(1-888-GENERAC), or visit
ing, operating, and servicing procedures. The owner is
responsible for correct maintenance and safe use of the
unit.
This manual must be used in conjunction with all other
supporting product documentation supplied with the
product.
SAVE THESE INSTRUCTIONS for future reference. This
manual contains important instructions that must be fol-
lowed during placement, operation, and maintenance of
the unit and its components. Always supply this manual
to any individual that will use this unit, and instruct them
on how to correctly start, operate, and stop the unit in
case of emergency.

Safety Rules

The manufacturer cannot anticipate every possible
circumstance that might involve a hazard. The alerts in
this manual, and on tags and decals affixed to the unit,
are not all inclusive. If using a procedure, work method,
or operating technique that the manufacturer does not
specifically recommend, verify that it is safe for others
and does not render the equipment unsafe.
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION, and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be
hazardous if performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
Owner's Manual for Power Zone Gateway on PZ 410
(000100a)
www.generac.com for start-
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
The operator is responsible for proper and safe use
of the equipment. The manufacturer strongly
recommends that if the operator is also the owner, to
read the owner's manual and thoroughly understand
all instructions before using this equipment. The
manufacturer also strongly recommends instructing
other users on how to properly start and operate the
unit. This prepares them if they need to operate the
equipment in an emergency.
Introduction and Safety
(000001)
(000002)
(000003)
1