Calendars; Set Date/Time; Communications - Generac Power Systems Power Zone 410 Owner's Manual

Figure 3-28. Ground Fault Indication (GFI)

Calendars

See Figure 3-29. The Calendars screen displays date
and time related functions.
Figure 3-29. Calendars

Set Date/Time

This is covered in Date/Time.
Owner's Manual for Power Zone Gateway on PZ 410
Exercise Setup
See Figure 3-30. This screen is used to setup Single
generator exercise. Select how often the exercise should
run (weekly or biweekly) and which day of the week. Mul-
tiple days can be selected. Select the start week of Bi-
Weekly (this week or next week). Set Time of the Day
and Duration in 24 hour format.
015126
014620

Communications

The Communications screens are used to configure the
settings for the ethernet port used for connecting to an
external ethernet network, view the modules connected
on the internal Modbus RTU network through the Device
Manager, configure remote modbus access to the Gate-
way, configure SNMP, view and configure the Gateway
Internal serial (RS-485, RS-232) interfaces, configure IP
Whitelisting, and configure Email server and configure
distribution list for receiving alarm logs.
Installation and Operation
Figure 3-30. Exercise Setup
014619
17