Sprout SOUNDWAVE LITE Product Manual page 6

4. OPERATING CONTROLS
CONNECTING MULTIPLE SPEAKERS VIA UNISYNC
Using the UNISYNC feature you can connect up to
50 UNISYNC compatible speakers. In this example,
your Soundwave Lite is your primary device.
To connect a replica, short press the UNISYNC
button on your primary speaker once to enter
UNISYNC mode. Once the primary announces it is
in UNISYNC mode, repeat on the replica. After the
replica announces it is in UNISYNC mode, press the
UNISYNC button on the replica device once more –
the replica will announce it is using UNISYNC audio.
The primary speaker will show a solid blue light while
replicas will show a flashing red and blue light.
To exit UNISYNC mode, press the UNISYNC button
until you hear UNISYNC disabled.*
Press and hold the UNISYNC button for 6 seconds
to reset the UNISYNC function.**
*If UNISYNC is disabled, Soundwave Lite will disconnect from
but remember the replicas connected to it.
**Resetting UNISYNC will enable Soundwave Lite to 'forget' all
replica devices and Bluetooth connections.
8
4. OPERATING CONTROLS
MULTIPOINT CONNECTION
TM
Multipoint is a feature that allows Soundwave Lite
to connect to two Bluetooth devices at once. This
means that you can listen to music from one device,
whilst still hearing notifications and receiving calls
from another device.
To setup Multipoint:
1. Connect your first Bluetooth device.
2. Hold down the UNISYNC button for 2 seconds
to disconnect Bluetooth.
3. Connect your second Bluetooth device.
4. Hold down the power button for 2 seconds
and turn off Soundwave Lite.
5. Hold down the power button for 2 seconds
and turn on Soundwave Lite.
Soundwave Lite will announce "Bluetooth
connected" twice. Soundwave Lite will play audio
from the last device it receives a command from,
but it will treat the device with calls and notifications
as priority.
9