Advertisement
CO
or"
DISPLAY MENU
Motion Security may mistakenly start
when:
* background is plain, like a white wall, or
has distinct vertical, horizontal, or sianted
Stripes, like a venetian blind.
* brightness suddenly changes.
Motion Security may not start when:
* motion is very slow or fast.
* moving object is very small.
* motion occurs only in 1 corner of viewing
area.
* in poor lighting (in this case, MOTION
SECURITY flashes).
* background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
Note:
* Security recording starts if Camcorder is
bumped or repositioned.
* This feature is not available during normal
recording.
* While in Security stand-by, the
following functions are not available: Record/
Pause, Stand-by mode, Digital E.I.S., Video
Effects (Auto/Digital Fade).
Before you begin...
Security Mode
e Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
* Insert cassette with record tab (page 13).
* Set POWER to CAMERA.
* Securely position and aim Camcorder.
1
Press MENU
for MENU
mode.
Press UP A or DOWN Y to select
SECURITY Ñ
PAGE
2/2
A
DISPLAY
; ON
SELF
DEMO
: OFF
SECURITY
: OFF
VIDEO
EFFECTS
; FADE
BLACK
SELECT:
PUSH
'Y/A KEY
SET
: PUSH
DISPLAY
KEY
END
: PUSH
MENU
KEY
Press DISPLAY to select ON.
Press MENU to exit. (If cassette is
not inserted, "Eg" wil! flash.)
MOTION
SECURITY
MOTION
SECURITY
STAND-BY
* Recording will start about 3 seconds
after motion is detected.
* Date and time are recorded if
displayed in EVF or LCD monitor
(page 19).
* Recording stops about 30 seconds
after motion ceases.
To cancel Security Mode, set POWER to
OFF.
39
Advertisement
