Advertisement
Camera Recording
"Using the LCD Monitor R
Before you begin... m
View recording scene on the LCD (Liquid
* Connect Camcorder to power source.
Crystal Display) monitor.
* Insert cassette with record tab (page 13).
ER
RENTAS
IN
Z
P
Press LCD-OPEN to unlock LCD
monitor.
Swing LCD monitor fully open and
adjust viewing angle.
Caution:
Rotating partially open LCD monitor
may block cassette door and damage
Camcorder body.
3
Set POWER to CAMERA.
* LCD monitor turns on/off by the
POWER switch.
* EVF shuts off when LCD monitor is
opened and turns back on when
LCD is closed.
* Both EVF and LCD monitor turn on
when LCD is at 180? (see above
left).
This allows both you and the subject
to view the recording.
4
Turn BRIGHT control to adjust LCD
monitor brightness level.
5
Press RECORD/PAUSE to start
recording (page 21).
Note:
* Using LCD monitor reduces battery operation
time.
* Return LCD monitor to locked position when not
in use.
22
For assistance, call 1-800-211-PANA(7262)
Advertisement
