Advertisement
L
A
IDA i Boe CERRADA ERIS
¿TW'Playback
or: Viewing: -
Connect Camcorder to a TV to view
playback or recordings in progress.
TV with AUDIO/VIDEO IN Jacks.
To Audio In | Y
Audio/Video
Cable
(Supplied)
AY
To Audio/Video Out
TV without AUDIO/VIDEO IN Jacks.
To Audio/
Video Out
(D.
RF Adaptor
VHF Antenna
300 ohm-75 ohm
transformer
or F Connector
UHF Antenna
TV/VCR
Selector
VHF Connecting
Cable
To VHF Antenna
Terminal
28
Playing Back Recordi
ue
CELA
YATEZ. ORES AR A
SR
Before you begin...
* Connect Camcorder to power source.
* Make all TV-Camcorder connections.
1
Set POWER to:
VCR
— view playback.
CAMERA — view picture as it is
recorded.
2
Turn TV ON and set to LINE
INPUT.
See TV owner's manual.
3
Begin playback or recording.
If TV has no VIDEO/AUDIO IN jacks,
connect PV-RF16 RF Adaptor
(optional). Tune TV to CH 3 or 4 to
match RF Adaptor CH 3/4 Selector.
Set Adaptor's TV/VCR Selector to
VCR for playback.
To watch TV only,
a Set Camcorder POWER to OFF.
b Set RF Adaptor TV/VCR Selector to TV.
C Turn TV ON and select channel.
CATV System Installer
This reminder is provided to call the
CATV system installer's attention to
Article 820-40 of the NEC in USA (and
to the Canadian Electrical Code in
Canada) that provides guidelines for
proper grounding and, in particular,
specifies that the cable ground shall be
connected to the grounding system of
the building, as close to the point of
cable entry as practical.
For assistance, call 1-800-211-PANA(7262)
Advertisement
