Advertisement
Camera Recording
fEasyiEditistand:by 73
Before you begin...
* Connect Camcorder to power source.
For a smooth transition between scenes if.
Insert cassette with record tab (page 13).
recording is stopped, and then started within
24 hours.
Press RECORD/PAUSE to stop
recording.
2
Set POWER to OFF and leave
cassette in Camcorder.
3
To resume recording, set POWER
to CAMERA.
4
Press RECORD/PAUSE
to resume
recording.
Note:
* Use Manual Easy Edit (below) if more than
24 hours before recording is resumed.
Before you begin...
E
* Connect Camcorder to power source.
For proper continuity when taping from
* Insert cassette with record tab (page 13).
Stop mode or after attaching a new Battery.
1
Set POWER to VCR.
2 @ Press REWIND/SEARCH to
rewind a few seconds of tape.
© Press PLAY to review recording.
(9 Press STILL where you want to
continue recording.
3
Set POWER to CAMERA.
4
Press RECORD/PAUSE
to resume
recording.
24
For assistance, call 1-800-211-PANA(7262)
Advertisement
