Advertisement
SR
AAA
AOS
a
Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA.
Camcorder automatically focuses on
subject even during zooming.
Auto Focus is on when "MF" is not
displayed in EVF or LCD monitor. Push
MANUAL
MANUAL FOCUS to remove "MF" in EVF
FOCUS
or LCD monitor if necessary.
Use Manual Focus (MF) when :
:
* subject is not centered in EVF or LCD monitor.
* recording through glass.
* subject has shiny surface.
* lighting is poor.
* subject is slanted.
* subject is far away with objects in foreground.
e subject is bright and flat, like a white wall.
* subject has distinct horizontal lines.
* subject has fast motion, like a golf swing.
1
Push MANUAL FOCUS so "MF"
(Manual Focus) appears in EVF or
LCD monitor.
EVF or LCD
Monitor
2
Hold down
"T" (telephoto) on
POWER
ZOOM to maximum zoom
in.
3
Turn MANUAL FOCUS until subject
is in focus.
* Back away from subject if necessary.
4
Hold down "W" (wide angle) on
POWER ZOOM as desired.
* Refocus as needed
when aiming at new scenes.
-Macro FOCUS (close-ups)
Auto Focus functions up to 12.7 mm (1/2 inch) from subject.
Hold down "W" on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
32
For assistance, call 1-800-211-PANA(7262)
Advertisement
