Advertisement
Source (Playing)
Camcorder
Out
VHF Connecting
Cable (not supplied)
To Audio-£][}-To Video
In
Yl
In
Audio/Video Cable
(supplied)
Monitor with your TV .
e Turn TV on and tune to VCR
channel (CH3 or CH4).
* Set TV/VCR Selector on VCR to VCR.
Before you begin...
* Make Camcorder-VCR connections
(see left).
* Turn both units on.
* Set VCR input signal to LINE.
Please see VCR owner's manual.
* Set Camcorder POWER to VCR.
1
Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
Press PLAY on Camcorder, then
press STILL at starting point.
Press REC, then STILL/PAUSE on
VCR.
STILL/PAUSE on VCR again to start
copying.
4
Press STILL on Camcorder and
Press STOP on both units to stop
copying.
Note:
* Camcorder wil! only playback tapes
recorded in SP or SLP mode.
* Dubbing may reduce picture quality.
CAUTION:
Unauthorized exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
30
For assistance, call 1-800-211-PANA(7262)
Advertisement
