Reverse The Door - Scandomestic WFF168W User Manual

Reverse the door

Tool required: Philips screwdriver, Flat
bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and
empty.
• To take the door off, it is necessary to
tilt the unit backwards. you should
rest the unit on something solid so
that it will not slip during the door
reversing process.
• All parts removed must be saved to
do the reinstallation of the door.
• Do not lay the unit flat as this may
damage the coolant system.
• It' s better that 2 people handle the
unit during assembly.
1 Remove the top right hinge cover.
2 Undo the screws. Then remove the
hinge bracket.
3 Remove the top left screw cover.
4 Move the core cover from left side to
right side. And then lift the upper
door and place it on a padded surface
to prevent it from scratching.
5 Unscrew and remove the bottom
hinge pin, turn the bracket over and
replace it.
6 Refit the bracket fitting the bottom
hinge pin. Replace both adjustable
feet.