First Use - Scandomestic WFF168W User Manual

• Select a location without direct
exposure to sunlight;
• Select a location with enough space for
the refrigerator doors to open easily;
• Select a location with level (or nearly
level) flooring;
• Allow sufficient space to install the
refrigerator on a flat surface;
• Allow clearance to the right, left, back
and top when installing. This will help
reduce power consumpt on and keep
your energy bills lower.
• It is advisable to keep at least 10mm gap
at two sides.
A 544
B 571
C 1426
D min= 50
E min=50
F min=50
I
G 948
H 1115
L 135
Levelling the unit
To do this adjust the two levelling feet at
front of the unit.
If the unit is not level, the doors and
magnetic seal alignments will not be
covered properly.

First use

Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal
accessor es with lukewarm water and some
neutral soap so as to remove the typical
smell of a brand new product, then dry
thoroughly.
Important! Do not use detergents or
abrasive powders, as these will damage the
finish.
• Adjust the adjustable foot to keep the
appliance stable.
• For the first usage, power on the
appliance for 2~3 hours before putting
in foods.
Temperature settings
Plug on your appliance. The internal
temperature is controlled by a thermostat.
There are 3 settings MIN, NORMAL and