Table of Contents
Advertisement
Available languages
Available languages
•
•
•
Unusual noises or
•
noisy operation
•
Outer surfaces are
•
wet
Inner surfaces are
•
wet
•
position shown (see
page 10).
COOLCUBE
is
overfilled.
Appliance exposed to
direct sunlight or a
heat source.
Door is opened too
often.
Appliance is not on a
level, firm surface or
may be touching other
items.
Note: It is normal to
hear
refrigerant
flowing
as
the
compressor
stops
and starts.
Water source or leak
too
near
the
appliance
-
dry
surfaces
thoroughly
and
move
the
appliance.
Door
opened
too
often or kept open too
often.
Make sure that the
door seals properly.
REVERSING THE DOOR HINGE
Fig
1
Position
of
components
prior
to
reversal
of
the door
hinge.
The door can be opened from left to right and vice versa.
Should you wish to change the opening direction, please
follow these instructions.
Note: all parts removed should be kept safely. You will
require these for the reinstallation of the door.
Remove the two screws (1) that hold the upper
•
hinge (5) (right side) to the frame.
Lift the door off and place on a padded surface to
•
prevent scratching.
Remove the blanking plug (8) from the hole in the
•
upper left corner of the door and transfer it to the
uncovered hole on the upper right corner. Press
firmly to secure it.
•
Remove the two screws (6) that hold the lower
hinge (2).
Remove the adjustable front left foot and transfer
•
it to the other side.
Fig
2
Position
of
components
after
reversal
of
the door
hinge.
Advertisement
Table of Contents
