Important Safety Information - Savant Power Storage 20 Installation Manual

Important Safety Information - Read First
Before installing, configuring, or operating any equipment, Savant recommends
that each dealer, integrator, installer, etc. access and read all relevant technical
documentation. Savant Power technical documentation can be located
by visiting savant.com/power. Vendor documentation is supplied with the
equipment.
Read and understand all safety instructions, cautions, and warnings in this
document and the labels on the equipment.
Safety Classifications In this Document
Provides special information for installing,
NOTE:
configuring, and operating the equipment.
Indicates a potentially hazardous situation which, if
not avoided, could result in injury, death, or damage
DANGER!
to Savant Power Storage 20.
Indicates potentially hazardous situation which, if
not avoided, could result in medium/slight injury or
IMPORTANT!
damage to Savant Power Storage 20.
Provides special information for avoiding situations
CAUTION!
that may cause damage to equipment.
Savant Power Storage 20 Installation Guide
009-2401-00 | 090623
Safety Statements
Read this entire document before installing or using Savant Power Storage 20.
Failure to read or follow any of the instructions or warnings in this document
can result in personal harm, including death, or damage to the product,
potentially rendering it inoperable.
DANGER!
– A battery can present a risk of electrical shock, fire, or explosion
from vented gases. Observe proper precautions.
– Savant Power Storage 20 must be installed by only Savant
authorized persons who have been trained in working with high
voltage electricity.
– Use Savant Power Storage 20 only as directed.
– Do not handle the device or its components with wet hands,
otherwise electric shock or death may occur.
– Do not use Savant Power Storage 20 if it is defective, appears
cracked, broken, (or otherwise damaged) or fails to operate.
– Never work on the system without first entirely powering down the
system and shutting off and locking out any power supplies to the
inverter.
– To protect the product and its components from damage when
transporting, handle with care. Do not impact, pull, drag, or step
on Savant Power Storage 20. Do not subject Savant Power Storage
20 to any high forces. To help prevent damage, leave Savant Power
Storage 20 in its shipping packaging until it is ready to be installed.
– Any installations must comply with The National Electric Code (NEC)
and local codes.
– Do not insert foreign objects into any part of the Savant Power
Storage 20.
– Any installation must comply with specifications for wire types,
conductor sizes, electrical and thermal insulation, branch circuit
protection, grounding, and disconnect devices.
CAUTION!
– Do not paint any part of Savant Power Storage 20, including any
internal or external components such as the exterior shell or casing.
– When installing Savant Power Storage 20 in a garage or near
vehicles, keep it out of the driving path. It shall be standing on the
floor. If possible, install Savant Power Storage 20 on a side wall.
–
Ensure installation is compliant with local and national electrical
codes.
- 3 -
Copyright 2023 Savant Systems, Inc