Hyundai i10 Owner's Manual page 48

4. Pull up the seatback lever and fold
the seatback toward the front of the
vehicle.
To use the rear seat, lift and push up
the seatback backward. Push the seat-
back firmly until it clicks into place.
Make sure the seatback is locked in
place.
When returning the rear seatbacks to
the upright position, remember to return
the rear shoulder belts to their proper
position.
When you return the rear seatback
to its upright position after being
folded down:
Be careful not to damage the seat
belt webbing or buckle. Do not allow
the seat belt webbing or buckle to
get caught or pinched in the rear
seat. Ensure that the seatback is
OAC3039006TU OAC3039006TU
completely locked into its upright
position by pushing on the top of the
seatback. Otherwise, in an accident
or sudden stop, the seat could fold
down and allow cargo to enter the
passenger
could result in serious injury or
death.
NOTICE
OAC3039007TU OAC3039007TU
• When returning the rear seatbacks
to the upright position, remember
to return the rear shoulder belts to
their proper position.
• Routing the seat belt webbing
through the rear seat belt guides
will help keep the seat belts from
being trapped behind or under the
seats.
WARNING
compartment,
03
which
3-11